Drive Away 2Day

Aston Martin Vantage GT3 : Concept Cars

The new race-inspired Aston Martin Vantage GT3 is the most powerful and focused road model that the company has made.

The 592bhp-plus 5.9-litre V12-powered model will be built in a limited production run of just 100 units, each costing about £250,000. Most of the production run is understood to have already been snapped up by Aston Martin’s VIP customer base ahead of the car’s Geneva motor show debut next month.

The new Aston is based on the V12 Vantage S road car and inspired by the Vantage GT3 race car. It makes extensive use of lightweight materials inside and out — including carbonfibre, magnesium, titanium and aluminium — to reduce its kerb weight by up to 150kg over the 1665kg V12 Vantage S with all the lightweight options fitted. In its standard form, the Vantage GT3 weighs 1565kg.

An extensive aerodynamic package also features on the Vantage GT3, as does a more focused seven-speed automated manual transmission, wider tracks, revised adaptive damper settings and a new titanium exhaust system.

David King, director of the Aston Martin Special Projects arm that created the model, told Autocar the aim was to “create the essence of a GT3 racer in a still-legal Vantage road car”.

King added: “We wanted to push the Vantage as far as we could to make a more extreme track day car that’s visually and functionally inspired by the race car, but still with the style and craftsmanship Aston Martin is known for.”

The engine, codenamed AM57, is carried over from the V12 Vantage S but with some modifications. The inlet manifolds are new, made from magnesium and with revised geometry. The titanium exhaust system is also new and offers a weight saving of 19kg over the V12 Vantage S’s exhaust system. As a result, power is up from 565bhp to more than 592bhp and torque rises slightly from 457lb ft to an estimated 461lb ft at its peak but with bigger gains through the rev range.

The torque tube is also new and made from magnesium, and the seven-speed gearbox has been recalibrated for faster shifts. However, the gearing itself is unchanged from the V12 Vantage S’s.

The final engine output and performance figures have yet to be confirmed by Aston, but the top speed drops from the 205mph of the V12 Vantage S and is rated at 185mph, due to the extra drag created by the aerodynamic package. The 0-60mph time is estimated at 3.5sec, which is 0.2sec faster than that of the V12 Vantage S.

The basic chassis and suspension system of the V12 Vantage S carries over to the Vantage GT3, but with several key modifications. Although the ride height remains the same, ground clearance is reduced by the new aerodynamic features and the track is 15mm wider at the front and 33mm wider at the rear. New spring rates and bars are fitted to the suspension set-up and the Bilstein adaptive dampers are retuned.

The Normal, Sport and Track modes from the V12 Vantage S are also carried over. These alter the firmness of the dampers, throttle response, gearshift speed and timing, exhaust note and steering assistance. They have all been retuned for the Vantage GT3, and King has promised “a very different feel” from the donor model for the GT3.King’s team is currently entering a two-month testing period to tune the various components and have “fairly aggressive targets to meet with performance”. Aston Martin Racing driver Darren Turner has also been enlisted to the development team for this chassis tuning stage.

Elsewhere on the chassis spec, the large Brembo carbon-ceramic brakes are carried over from the V12 Vantage S to the GT3. Lightweight 19in magnesium alloy wheels are shod in Michelin Pilot Super Sport tyres (the first time Michelins have been fitted to an Aston), 265/35s at the front and 325/30s at the rear. The alloys can be specced with a magnesium centre locking cap, another first for Aston.

The Vantage GT3 is wrapped in a new carbonfibre skin, which saves 20kg over the bodywork of the V12 Vantage S. The new bodywork and wider tracks make the Vantage GT3 50mm wider than the model on which it is based.

Visually, the Vantage GT3 is easily distinguished from the V12 Vantage S thanks to its extensive aerodynamic package, in part derived from the GT3 race car. Most striking at the front is the horseshoe graphic in the bonnet that helps with both cooling and airflow over the car. Meanwhile, the rear end is dominated by a large, fixed rear wing.

Inside, the weight-saving continues, because the centre console has been made out of carbonfibre and the carbonfibre seats have manual adjustment rather than electric. The infotainment system is also now fixed, rather than popping out of the dashboard. The cabin, sporty yet still luxurious, is trimmed in Alcantara and leather, and the carbonfibre is left exposed.

Contact Aston Martin
Website | Facebook | Twitter | Google+ | YouTube | Pinterest

Contact Autoblog
Website | Facebook | Twitter Google+

Sources : Aston Martin Vantage GT3 Photo | Aston Martin Vantage GT3 Article


Post a Comment